Description
Product Overview
Overview
The Cloudlifter CL-2 is a professional 2-channel mic activator designed to provide ultra-clean gain for dynamic and ribbon microphones. By utilizing patented discrete JFET circuitry, the CL-2 solves the common problem of low-output microphones struggling to reach optimal levels in a preamp or DAW interface without introducing unwanted noise or hiss. This dual-channel unit allows for two independent mono sources or a single stereo configuration, ensuring your microphones perform at their absolute peak potential.
What Stands Out
Key Details
- Active Ultra-Clean Gain: Delivers up to +25dB of transparent gain per channel, providing the necessary headroom for quiet sound sources and low-gain preamps.
- Patented JFET Circuitry: Employs a discrete signal path that avoids the use of transformers, capacitors, and resistors in the direct audio path to preserve the natural timbre of the source.
- Phantom Power Conversion: Efficiently converts 48V Phantom Power into clean gain, ensuring that the power is used to boost the signal without passing it through to delicate ribbon microphones.
- Impedance Optimization: Provides optimal impedance loading, which is critical for maximizing the frequency response and detail of dynamic and ribbon mics.
- Rugged Construction: Built for both studio and stage use, the unit is road-ready, portable, and manufactured in the USA.
Best For
Use Cases
- Studio Recording: Ideal for miking soft sound sources or using high-end ribbon mics that require significant gain before hitting the preamp.
- Live Performance: Increases gain before feedback, allowing performers to cut through the mix more effectively on stage.
- Podcasting & Streaming: Perfect for users with entry-level interfaces or noisy preamps who need a professional, hiss-free signal from dynamic broadcast mics.
- Long Cable Runs: Maintains signal integrity and strength when using extended XLR cables in large studio or venue environments.
Setup Notes
Installation
The Cloudlifter CL-2 is a Plug & Play device requiring no complex configuration. To set up:
- Connect one or two dynamic or ribbon microphones to the inputs.
- Connect the outputs to your mixer, audio interface, or preamp via XLR cables.
- Important: Enable +48V Phantom Power on your preamp or interface. The CL-2 requires phantom power to operate, but it will not pass this voltage to your microphone, keeping your equipment safe.
Compatibility Check
Compatibility
- Microphone Types: Fully compatible with all dynamic and ribbon microphones.
- Hardware Requirements: Requires a preamp, mixer, or audio interface capable of providing 48V Phantom Power.
- Configuration: Supports two independent mono channels or a stereo pair configuration.
Verified Product Facts
Additional Details
- Manufacturer: Cloud Microphones
- Model: CL-2
- Dimensions: 5.25″ x 5.75″ x 0.14″
- Weight: 1.23 lbs
- Origin: Made in the USA
- Warranty: Free lifetime limited warranty
1 review for Cloudlifter CL-2
There are no reviews yet.